Catscram utrasonic cat deterrent makes any area off limits to cats, even when you are asleep or nobody is home. CatScram detects motion and emits a high-pitched electronic sound that prevents cats from getting to places you don’t want them.
CatScram cat deterrent is inaudible to the human ear.
Even the most devoted cat owner has particular places around the home that they would prefer that the cat stay out of, off or away from. Safety for the cat as well as sanitary conditions for you are some of the concerns that come to mind. As most cat owners know, cats have minds of their own. In the past, teaching them to stay out of or away from areas was next to impossible. But now, thanks to CatScram, training a cat to avoid areas has become possible.
Catscram makes any area off limits to cats, even when you are sound asleep or nobody is home. It utilizes a passive infrared motion detector to sense when the cat nears the 90-degree protected area. The unit then emits a series of strong pulsating ultrasonic waves, which are harmless, are only heard by cats and are inaudible to humans. Cats find the sound so irritating that areas which are guarded soon avoided altogether. Because it uses sound waves, no bulky self-correcting collar needs to be worn by the cat. Catscram guards a six-foot range on the floor or flat surface and up to a 15-foot range or more when elevated or tilted. It uses minimal power and indicates when the 9-volt battery is low. CatScram keeps cats away from designated areas to protect your belongings and your cat. It can keep them away from poisonous plants, hot stovetops, balconies and dangerous machinery.
Passive infrared motion detector features an ultrasonic speaker which emits harmless high-frequency sound that deters cats, yet is inaudible to humans. The CatScram guards a six-foot range on the floor or flat surfaces and up to 15 foot range or more when elevated or tilted. Guaranteed to keep 'em off. . . your nerves!
CatScram emits a series of pulsating ultrasonic sound waves for four seconds each time movement is detected and the LED flashes four times simultaneously. The CatScram uses a passive infrared motion sensor to detect when the cat nears the 90 degree protected area. The result-your cat becomes irritated by the sound, and moves out of the protected area. . . and off your furniture, kitchen counter tops, or whatever!
CatScram Operation:
CatScram uses a 9-volt, alkaline battery (not included) or a 9-volt, AC/DC adapter which can be purchased at a consumer electronic store. Adapter must be center positive (+). If the unit is to be used in one place, using the adapter (rather than buying batteries) can be more economical.
Hearing Impaired Cats:
Some cats, typically but not limited to older or exotic breads, may not respond to CatScram. White cats, by nature, are hard of hearing and may not respond to this device.
Features:
- Passive infared motion detector with an ultrasonic speaker - inaudible to humans
- Protects property: Keeps cats off countertops, table tops, furniture, and drapes and out of specific areas or rooms
- Protects pets: Keeps cats off balconies and away from poisonous plants, hot stovetops and dangerous machinery
Allows use of a pet door for your dog while keeping your cat inside
- Portable, uses a 9-volt alkaline battery or is adaptable to 9-volt adapter operation
- Uses minimal power and indicates when the battery is low
- Shows when motion is detected via blinking LED
- Guards a 6-foot range on the floor or flat surfaces and up to a 15-foot range or more when elevated or tilted
- CatScram LED Indicators:
- Warm-Up Indicator: When switched on, CatScram warms up for 40 seconds. Diring this time, the LED flashes once per 1.4 pseconds for the first 32 seconds and increses to 4 flashes per 1.4 seconds during the last 8 seconds.
- Triggering Indicator: After it is warmed up, CatScram goes to work. The unit emits a series of pulsating ultrasonic waves for 4 seconds each time movement is detected and the LED flashes 4 time simultaneously.
- Low Battery Indicator: During the 40-second, warm-up period, if "Low Battery" occurs, the battery voltage is 7 volts or less. The LED will continue 8 flashes and the unit will shut down. Replace the battery immediately.
CatScram Specifications:
- Standby Current Drain: 60 micro-amp typical
- Ultrasonic Output: 118 DB typical
- PIR Protection Coverage: 6 feet on floor or flat surfaces, up to 15 feet or more if elevated or tilted
|
|
